Study on Spline Stress of Separator Plates in a Wet Multi-Plate Clutch.

As shown in Figure 13 a, for the same offset, the unevenness coefficient shows a decreasing trend from rectangular to trapezoidal to involute on the whole, although the trapezoidal tooth increases little compared to the involute tooth at 0.04° offset.

also in 29,525 other papers

In terms of peak stress, as shown in Figure 12 b, for the same teeth count, the peak stress increases with the offset; for the same offset, there is an overall trend where more teeth lead to lower peak stress on the separator plate.

also in 3,005 other papers