The n of the CPE 1 components for S wap and S pol are above 0.91 and show an increasing trend with immersion time, while the n value for S grd ’s CPE 1 component is the lowest of the three (lower than 0.88) and exhibited a decreasing trend with immersion time, indicating that surface dispersion effects on S grd were progressively intensified during corrosion.
← all excerpts
Surface and Electrochemical Performance Variations of 2205 Duplex Stainless Steel in Multistep Surface Processing.
2
—
—
The sentences
The phase angle exhibited in the low-frequency region exhibited an increasing trend as corrosion progressed.