Functionalized Nanoporous Biocarbon with High Specific Surface Area Derived from Waste Hardwood Chips for CO<sub>2</sub> Capture and Supercapacitors.

The microporous area showed a decreasing trend going from WPC600‐3 to WPC600‐6, as the higher amounts of activation tend to cause more etching of the carbon walls, which leads to the widening of existing micropores along with the formation of new mesopores (Figure 1c ).

also in 47,180 other papers

The total pore volume of the materials showed an increasing trend, which was further confirmed through the creation of higher porosity by using larger amounts of KOH for activation.

also in 63,971 other papers