Influence of the Milling Conditions of Aluminium Alloy 2017A on the Surface Roughness.

Materials (Basel) · 2022 · PMC9146991 · PMID 35629652

Europe PMC DOI

hedged sentences

—

closest p

—

boldest claim

The sentences

an increasing trendno p-value reported

For a feed rate of 0.16 mm/tooth, there was a slight decrease in RSm to 0.027 mm, followed by an increasing trend.

also in 63,971 other papers

a decreasing trendno p-value reported

The parameter maximum peak height of the roughness profile Rp in the feed rate range 0.02 ÷ 0.06 mm/tooth ( Figure 9 a–c), showed a decreasing trend, from a maximum value of 0.818 μm to 0.552 μm.

also in 47,180 other papers

Quoted from the open-access full text in Europe PMC under the licence the publisher applied. The sentence is reproduced exactly as published; the emphasis is ours.