Parametric Investigation and Optimization to Study the Effect of Process Parameters on the Dimensional Deviation of Fused Deposition Modeling of 3D Printed Parts.

Length, width, and angle deviation decrease with an increase of the print speed, while height deviation first decreases (from 50 to 60 mm/s) and then shows an increasing trend (from 60 to 70 mm/s).

also in 63,971 other papers

For print orientation from 0 to 45°, an increasing trend is observed for length deviation, while from 45 to 90°, it shows a decreasing trend.

also in 47,180 other papers