In Figure 8 b, the flux density increases and then decreases with the increase in stress at a certain temperature, and the flux density is maximum at about 35 Mpa; the flux density shows a decreasing trend with the increase in temperature at a certain stress.
← all excerpts
Investigation and Application of Magnetic Properties of Ultra-Thin Grain-Oriented Silicon Steel Sheets under Multi-Physical Field Coupling.
2
—
—
The sentences
The experimental results are shown in Figure 7 , where it can be observed that the saturation flux density of the grain-oriented silicon steel increases with increasing frequency and the losses show an increasing trend, but the growth is slower at lower frequencies and increases faster at higher frequencies, which is also in accordance with Equation (4) [ 26 ].