Investigation of an Innovative Roll-to-Plate (R2P) Hot-Embossing Process for Microstructure Arrays of Infrared Glass.

Figure 4 d shows that the embossing speed increased from 0.2 mm/s to 1.0 mm/s, and the height of the embossing glass showed a trend indicating that the lower the embossing speed, the higher the structural height.

also in 53,322 other papers

The results indicate that both the overall microstructure roughness and the average roughness of the individual microlenses exhibited an increasing trend as the embossing force increased, suggesting a positive correlation between roughness and embossing force.

also in 63,971 other papers