Effect of Surface-Modified Mica in Hybrid Filler Systems on the Curing and Mechanical Behavior of Ethylene-Propylene-Diene Monomer (EPDM)/Butadiene Rubber (BR) Blend.

The modulus at 400% strain ( Figure 5 f) showed a trend similar to that of tensile strength, further confirming that reinforcement efficiency was enhanced by URE treatment.

also in 53,322 other papers

The CRI, calculated using Equation (1), showed a decreasing trend with increasing mica content: (7) C R I = 100 T 90 − T s 2 This behavior is likely due to the physical adsorption of accelerators onto the high surface area of mica particles, which become more pronounced at higher filler loadings.

also in 47,180 other papers