Strength and Hydrophobicity of Superhydrophobic Concrete Based on Hydration Products and Surface Microstructure: Influence of Curing Temperature, Humidity, and Mesh-Coating.

The hydrophobicity of TE2A10 also showed an increasing trend with the increase in curing temperature, and the contact angle was greater than 150° at the 10 °C curing temperature, i.e., 154.7°, and at 40 °C, the contact angle further increased to 165.3°.

also in 63,971 other papers

With the elevation of maintenance humidity, DT2A10’s contact angle showed a trend of increasing and then decreasing; the contact angle reached the highest value of 155.5° under 75% humidity, and the contact angle decreased to 146.2° under 95% humidity.

also in 53,322 other papers