Green Composites Based on Mater-Bi^® and <i>Solanum lycopersicum</i> Plant Waste for 3D Printing Applications.

It was found [ 16 ] that FDM could be preferable up to 10% HC content, leading to better mechanical properties (in particular, with regard to the elastic modulus) in comparison to CM, likely due to rectilinear infill and fibres orientation; furthermore, it was possible to get more dense structures than by CM [ 17 ], obtaining quite significant improvements of the mechanical properties (especially flexural ones) in comparison to the neat polymer.

also in 5,695 other papers