Excerpts

It can be seen that both curves have an increasing trend, which correlated with the increase in nano-reinforcement content.

In the case of k 2 and h coefficient values, there was an increasing trend of these parameters in the following series: La(III) > Pr(III) > Nd(III) > Ce(III).

Upon adding both reinforcements to Al matrix to form a hybrid nanocomposite, an interesting trend was observed.

Figure 2 a–d highlights a significant trend.

The averaged diameter size examined with a help of ImageJ software shows a decreasing trend with increasing homogenization time.

There is an increasing trend of using metal-free materials in the oral environment in order to avoid ion release and corrosion problems.

With the increase in the leaching time, the pH value showed a decreasing trend.

(2) When the average grain size is the same, as the size factor decreases, the error shows an increasing trend.

Looking at the phasegrams sequence, starting with the Neat sample, a clear trend between particle percentage and amounts of aggregates was found.

The kinetic correlation coefficient R 2 of the double temperature range was above 0.99, indicating that the regression effects are highly significant and credible.

With increasing hydration time, the compressive strength of the specimens shows an increasing trend.

As t 8/5 increased, an increasing trend in cleavage-element size was observed.

This feature is particularly relevant in the low pH range, between 2 and 6, while at higher pH values, the surface charge fluctuation is minor but maintains a decreasing trend.

These results demonstrate a clear trend, with significantly lower vanadium amounts than expected based on the nominal values at higher vanadium loadings.

Similarly as for u ( P ) avg , likewise u ( P max ) increases absolutely but shows a decreasing trend of relative values with increasing temperature difference over the TEM.

Our results show an increasing trend of the electron-phonon coupling factor for high electron temperature.

The 28-dUCS response surface curvature (intensity growth rate) in Figure 5 b shows a decreasing trend with a decrease in B and D .

The importance of weave and structure in this case was almost insignificant because the distribution of liquid drop on the hydrophilic surface was transmitted by direct contact from fibre to fibre.

A significant trend in the nitrides’ hardness was observed by us in the binary system AlN-GaN with the formation of the novel nanoceramics Al 0.5 Ga 0.5 N—the nanoceramics made of pure solid solution were shown to have a rather low H V of 3.8 GPa, and another made mostly of Al 0.5 Ga 0.5 N was shown to have a bit higher, but still low, H V of 7.7 GPa [ 11 ].

The nitrogen levels showed an increasing trend with a p -value of 7.6 × 10 −5 on the slope.

In particular, we evidenced that low angle scattering features, associated with local structure parameters, show a significant trend as a function of the oxide composition.

Moreover, the fabric stiffness and mechanical properties showed an increasing trend due to the combined mercerization efforts. pre-mercerization post-mercerization combined mercerization woven cotton fabric stiffness pmc-status-qastatus 0 pmc-status-live yes pmc-status-embargo no pmc-status-released yes pmc-prop-open-access yes pmc-prop-olf no pmc-prop-manuscript no pmc-prop-legally-suppressed no pmc-prop-has-pdf yes pmc-prop-has-supplement no pmc-prop-pdf-only no pmc-prop-suppress-copyright no pmc-prop-is-real-version no pmc-prop-is-scanned-article no pmc-prop-preprint no pmc-prop-in-epmc yes pmc-license-ref CC BY 1.

The lowest relative gene expression levels were found in the lowest temperature group, 100 °C, except for BGLAP in non-osteogenic media, where there was a highly significant increased expression.

The mass loss rates of all the samples for different fibers under the same absorption dose appear different, and the mass loss rates show an increasing trend of Fiber-3, Fiber-4, Fiber-1, and Fiber-2.

Nevertheless, a decreasing trend in average aspect ratio (see Figure 5 d) was noted, when the temperature was higher than 160 °C.