Excerpts

Figure 5 illustrates an increasing trend in Ca 5 (SiO 4 ) 2 (OH) 2 contents as a function of loaded wollastonite.

Moreover, quite significant differences in the course of the 2,4-D adsorption isotherms should be noted, especially in the area of lower concentrations for the three tested fractions.

So far, the effect of thermal treatment of diatomite on the ability to dampen sound has not been described in the scientific literature, nor has the study of diatomite from the deposit presented in the article, which is quite significant due to the amount of material and its origin. 2.

Based on the data in Table 3 , a clear trend can be observed: as the step distance l increases during the deposition process with a glass pipette, and the differences between the upper and lower limits r 1 and r 2 decrease, and the average deposition speed for a 70 μm line segment significantly improves.

[ 35 ] used LN 2 to cool heated marble, observing a significant increase in porosity, while l V p , UCS, and E showed a decreasing trend, primarily due to thermal damage incurred during rapid cooling.

With increasing cooling rates, the proportion of micropores and small pores in granite gradually increases, and there is a clear trend of increasing pore size.

In recent years, the pursuit of lightweight of aerospace and aircraft components has emerged as a significant trend alongside the rapid growth of the aviation industry and additive manufacturing (AM) [ 5 ].

Furthermore, an increasing trend in the reactivity of the activated samples was detected with an increasing rotation speed or milling time.

Meanwhile, a comparison of Figure 7 a,b reveals a decreasing trend in the resonance displacement response of the specimens as the temperature increases from 50 °C to 100 °C.

The need to collect and recycle batteries varies from one country to another, but there is a definite trend towards stricter control over this aspect [ 4 ].

It can be seen that as the σ 3 increases, the failure vibration number of the specimen decreases, while the growth rate of pore water pressure accelerates, and the pore water pressure curve shows an increasing trend from slow to steep, indicating that the liquefaction resistance of the solidified specimen gradually decreases [ 42 ].

Subsequently, when the concentration increases to 1.5 mol/L, a decreasing trend is observed.

When soaked in water, secondary hydration occurred, resulting in an increasing trend of 518 phase content in MOC.

The microhardness measurements showed an increasing trend from the WM center to the BM.

- The spinel cubic lattice exhibits a quite significant lattice parameter increase from 8.21 Å to 8.32 Å with increasing Co content, with reference structures like Co 3 O 4 and Fe 3 O 4 having lattice parameters equal to 8.08 Å to 8.39 Å, respectively.

The mass loss data dynamics from crystallization water dehydration ( Figure 9 a) present a decreasing trend for the Ms series and an increasing trend for Mz, particularly well pronounced when comparing the ML data between Mz28—1.24% and Mz120—2.50%, which is the highest value.

The selection of the heating rate and duration of thermal load exposure follows an established trend in studies [ 28 , 29 , 30 ] on the thermal behavior of alkali-activated materials, where heating rates typically range from 1 to 10 °C/min and the exposure duration from 1 to 4 h.

Along the Y-axis of the melt pool, there is a decreasing trend in temperature away from the spot center.

With the increase in the IMC thickness at the interface, the maximum tensile stress shows an increasing trend, which means that the interlaminar compounds at the Mg-Zn interface can strengthen the mechanical properties between the Mg-Zn interface, which brings the advantage that the risk of delamination between the Zn coating and the Mg matrix is prevented due to the presence of Mg-Zn interface compounds in the dilation process of the Mg matrix Zn coating vascular stent.

The compaction levels met the testing requirements, the surface deflection values showed a decreasing trend, and the deformation resistance was good, consistent with the general development patterns of semi-rigid sub-bases.

As shown in Figure 15 , 3424 cm −1 is the peak associated with carbamate, and the overall peak area at this position shows a decreasing trend, indicating that the structure of the polyurethane hardness part has been damaged.

However, with the increasing number of cycles, both quality and strength exhibited a decreasing trend.

As the rubber replacement rate increases, the peak load in the figures exhibits a decreasing trend, consistent with experimental findings.

The data analysis in Table 1 indicates that the unit cell parameters of the doped ceramics showed a decreasing trend with increasing samarium concentration.

Conversely, the stiffness modulus demonstrated a decreasing trend with increasing asphalt content, indicating reduced structural rigidity and heightened fatigue damage at higher asphalt percentages.