Excerpts

Both figures reveal a clear trend where the effectiveness of the adsorbent material increases as the pH level increases, reaching its peak at a pH of 6.

As shown in Figure 16 , the number of proton bands decreases and the color becomes lighter as the irradiation group increases, indicating a decreasing trend in the expression levels of tyrosine phosphorylated proteins in the testes of P. xylostella . 3.

In contrast with M Ca and M Ni , cineole was less prominent in M Ro (track 12) and almost insignificant in M Ne (track 10).

Pearson correlation statistical analysis was performed for the detection of a probable significance between two different parameters.

The results obtained using pulsed-field gradient 13C NMR showed a trend of a decrease in D with increasing salinity of the brines; for example, 2.06 10 −9 m 2 s −1 in 1.0 m NaCl decreasing to 1.29 10 −9 m 2 s −1 in 5.0 m NaCl [ 45 ].

Under these circumstances, one can use hygroscopic metal salts (often hydrated salts) with a marked trend to capture water when mixed with organic anions, in such a way that the mixture, once sealed and subject to heat, may possess enough solvent as to completely mix the reagents and promote the crystallization aided by the autogenous pressure generated in the vessel.

Moreover, their contents in the fruits or peels of Citrus genus plants also present a decreasing trend with the delay of harvest time [ 81 , 82 ], which is similar to the decreasing trend of stachydrine and choline.

It was found that the flexural strength of styrene–acrylic acid lotion cement had an increasing trend, and the maximum value at 28 days was 9.7% higher than that of the control sample [ 60 ]. 2.3.

It is noteworthy that an interesting trend is observed for sorption methods, which consists of the possibility of involving some types of waste as a feedstock to obtain effective sorbents for the extraction of other types of waste.

The peak area of the derivative product showed an increasing trend with amounts of acetic anhydride between 50–150 μL, and the maximum peak area of the derivative was reached when the additional amount of acetic anhydride was 150 μL.

An increasing trend consists of the synthesis of IIPs as sensors using electrochemical detection for hazardous metal ions.

The results showed that after treatment of MCF-7 cells with A2 for 24 h, both MDM2 and p53 protein showed an increasing trend at 50 μM.

Abstract Intelligentization of materials and structures is an important trend.

Corroborating the nature of the decay of the CRs—the loss of H + —the experimental kinetics of disappearance of 1 +• , determined by the electrochemical methods, closely parallels (Brønsted plot, n = 4, R = 0.997, p = 0.00284) their thermodynamic acidity, obtained from B3PW91/6-311++G(d,p) (acetonitrile, C-PCM) quantum chemical calculations (Equation (9)): log (k) = 0.258 × p K a − 1.436 (9) Going through the p K a of silatranes 1 ( Table 3 ), an interesting trend can be observed, whereby whatever the substituent R, the proton in 1 +• is preferentially eliminated from β-carbon.

In addition, the thermal responsiveness of the material was improved after the addition of A-BN and GO, which was seen by a slight shift in the thermal property curve of the CPCM, and the melting temperature of the CPCM showed a decreasing trend with the increasing content of A-BN and GO.

Effect of Acidolysis Ultrasonic Power on the Bagasse CNC Yield As shown in Figure 4 , with the increase in the ultrasonic power of the acid digestion, the CNC yield of sugarcane bagasse showed an overall trend of first increasing, then decreasing, then increasing, and then decreasing.

Effect of Acid-Digestion Temperature on the Sugarcane Bagasse CNC Yield As shown in Figure 1 , with the increase in acid-digestion temperature, the CNC yield showed a trend of increasing and then decreasing, and the increase in temperature had a promoting effect on the CNC yield in a certain range, but a temperature beyond the given range destroyed the CNC stability and caused the CNC yield to decrease.

However, over the past five years, there has been an increasing trend in research, with many studies demonstrating excellent results.

The effect of the field is most profoundly observed in the low shear rate regime showing up to a 300% rise and then becoming almost insignificant as the shear rate is increased.

The pC 20 values for C 12 -E n -C 12 displayed an increasing trend from 3.07 to 3.36 with spacer lengthening.

It is further noted that P05 and P10 showed marginally significant values in the Bray–Curtis method for the experimental phase.

The p values of ethanol concentration (X 1 ), solid-liquid ratio (X 2 ), and extraction time (X 3 ) were all less than 0.01, which was extremely significant, indicating that the selected factors had significant impacts on the response value.

LME, FME, and WPME yield recorded high predicted R-Square values, which supported the highly significant model it was, as reported by a previous study [ 16 ].

Therefore, there was an increasing trend of GSH supplementation.

However, the quantum yields dramatically change along the series passing from mono- to bis- and tris-chelate forms (7%, 2%, and <1% respectively), highlighting a decreasing trend as a function of the stoichiometry.